Factory-direct-hardware Hansgrohe 10402001 Axor Starck X Manuel d'utilisateur télécharger pdf (Page 2)

Starck Tub Filler

10402XX1

Technical Specification

Maximum incoming water pressure 145 psi

Recommended water pressure 14.5 - 72 psi

Recommended max. incoming hot water temp. 120

F - 140

Flow rate of tub filler @ 45 psi 5.75 gpm

Flow rate of handshower 2.5 gpm

Backflow prevention furnished by check valve in the handspray outlet and automatically

closing diverter

Installation Considerations

• This unit requires 2 1/2" female fittings, located 5 7/8" apart on center

(+/- 5/8"),

recessed 3/8" behind the surface of the finished wall.

• This unit is not anti-scald. If anti-scald is required by local plumbing code, or is

desired, install this unit with a remote pressure balance valve, such as Hansgrohe

13418181 or similar unit.

1 2 3 4 5 6 7 8

Pas de commentaire

Factory-direct-hardware Hansgrohe 10402001 Axor Starck X Manuel d'utilisateur Page 2