Factory-direct-hardware Hansgrohe 06438 Manuel d'utilisateur télécharger pdf (Page 3)

Push the elbow firmly over one end of the handshower

hose (1). Tighten the hose nut (2).

From the top, thread the hose through the handshower

holder escutcheon and handshower holder (1). Snap the

two halves of the hose insert around the hose (2). Press

the hose insert down into the holder. Install the escutch-

eon (3).

Seal the threads on the inlet end of the high pressure

hose with Teflon tape. Install this end of the hose to the

outlet on the mixing valve.

Connect the handshower hose to the high pressure hose.

1 2 3 4 5 6 7 8

Pas de commentaire

Factory-direct-hardware Hansgrohe 06438 Manuel d'utilisateur Page 3